Print Friendly
Email

Pro O2

Pro O2

Please contact us for more information, download a PDF brochure or
to place your order or as questions click enquire.

Enquiry Download Pdf

Nuvair manufactures Gas Analyzers for the Diving, Medical, Safety, Industrial and Government sectors.

Our Pro O2 Analyzers come in 2 body designs portable and panel (compressor) mount in addition the sensor can be housed in the body or attached via remote cable. All four designs allow for the user to replace batteries and sensors as needed.

Easy to operate, extremely accurate and stable, the Nuvair Pro O2 unit is preferred by commercial, military, technical, and advanced recreational divers using Nitrox. Our water and impact resistant case is designed for everyday use in the marine environment. To change the battery or Sensor, simply unscrew 4 screws and you have easy access to these user changeable components. The Pro O2 analyzer can be placed in line with your compressor during gas production or as a standalone unit testing and individual scuba tank or storage cylinders of Nitrox. We offer a wide range of accessories for adapting to compressors and diver (buoyancy compensator) BC power inflators. All Pro O2 units are built in house and tested before leaving and are ready to use upon receipt. (BC flow adapter sold separately.)

Pro O2 Analyzers Standard (Part#9450) and Remote (Part#9452)

Panel or Compressor Mount Pro O2 Analyzers Standard (Part#9460) and Remote (Part#9462)

Features:

  • Fast Response, Thermally Compensated Sensor
  • Completely Sealed, Water Resistant Housing
  • Ideal for Nitrox Production Use
  • Easy Calibration
  • User Replaceable Battery and Sensor
  • On/Off Switch
  • Highly Accurate and Stable Output
  • Internal Sensor
  • Sample Low Pressure Gas Flow
  • Direct High Pressure Gas Cylinder Analysis

Specifications: *
Range: 0.1-100.0% Oxygen (0-1 ATA PPO2)
Display Accuracy: +/- 0.1%
Sensor Type: Electrochemical
Expected Sensor Life, Room Air: 36 Months
Power: 9V Alkaline Battery
Response Time: Less Than 6 Seconds to 90% of Final Value
Operating Temperature: 32-104° F (0-40° C)
Storage Temperature: 32-122° F (0-50° C)
Pressure: Sensitive to Partial Pressure
Humidity: 0-99% RH (Non-Condensing)
Warranty: 36 Months Pro-Rated
* All specifications are at ambient / sea level, 25° C

Pick-O2 is a small hand-held instrument including an electo-chemical sensor for quick determination of Oxygen-concentration. Based on the diffusion principle, it can either work passive or active in a gas stream.

Specifications: *
Display: 2 Digit LCD / Digit
height: 12.7mm
Calibration: 1 Button, after pressing displayed Value = 21 Vol.% O2
Effective range: 0 … 99 Vol.% O2
Resolution: 1 Vol.% O2
Accuracy: +/- 0.5 Vol.% O2 from 0 to 50 Vol.% O2
+/- 2 Vol.% O2 from 50 to 99 Vol.% O2
Response Time 90%: less than 2 seconds
Sample rate: 1 per second
Temperature range: 0 – 50° Celsius
Connector: M 16 x 1
Dimensions: 74mm x 48mm x 59mm (H x W x D)

Please contact us for more information, download a PDF brochure or
to place your order or as questions click enquire.

Enquiry Download Pdf





© Copyright Pro Diving Solutions Australia 2012. All Rights Reserved | Privacy Policy
get in touch